Safety Information - Digihome DTR0207 Instruction Manual

SAFETY INFORMATION

Mains supply
This equipment is designed to operate from a 220-240 Volt, 50Hz AC mains supply. Other power
sources may damage it. Check that the rating label on the equipment says 230V AC ( ~ ) before you
plug it in for the first time.
Mains plug
We have fitted this equipment with a standard mains plug.
• If the mains lead gets damaged it must be replaced by a qualified service agent with an approved
lead of the same type.
• If you cut off the mains plug, for example to fit a different type, please destroy the old plug as it would
be dangerous if inserted into a live power outlet. Carefully follow the wiring instructions supplied with
the new plug.
• If a fuse is fitted to the plug, remove the fuse before throwing the plug away.
• Carefully follow the wiring instructions supplied with a new mains plug.
• Never use a fused mains plug without the fuse cover.
Mains plug wiring for the UK
In a re-wirable plug the wires in the mains lead of this equipment must be connected as follows.
• The wire coloured brown must be connected to the terminal that is marked with the letter L.
• The wire coloured blue must be connected to the terminal that is marked with the letter N.
• Do not connect anything to the earth terminal which is marked E, or
• You must make sure the mains lead is firmly secured under the cord clamp.
Mains fuse
UK standard (BS1363) plugs must have a 5 amp (BS1362 type) fuse fitted. Replace the plug or have
the power lead assembly replaced if the fuse cover is lost.
Symbols
This equipment is double
insulated and an earth con-
nection is not required.
This mark is applied to show
the equipment conforms to
European safety and electro-
magnetic compatibility standards.
Dangerous voltage constituting
a risk of electric shock is present
inside this equipment.
There are important operating and
maintenance instructions in the lite-
rature accompanying this equipment.
2