QUINCE™
SINGLE LEVER
SEMI-PROFESSIONAL
KITCHEN FAUCET
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Recommended Tools
Phillips Screwdriver
1
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
(A) Installation with ESCUTCHEON (1). Apply a
bead of putty to bottom edge of ESCUTCHEON with
PUTTY PLATE (1).
Make certain the SEAL (2) is
properly seated in recess of faucet body. Insert
SUPPLY HOSES (3) and SHANK (4) through hole of
ESCUTCHEON with PUTTY PLATE (1) and mounting
surface. Follow mounting instructions below to
secure faucet to mounting surface.
(B)
Installation less ESCUTCHEON (1). Discard
ESCUTCHEON with PUTTY PLATE (1).
the SEAL (2) is properly seated in recess of faucet
body. Insert supply HOSES (3) and SHANK (4)
through mounting hole and
sink or mounting surface.
Assemble RUBBER WASHER (4), METAL WASHER
(6) and threaded LOCKNUT (7) onto SHANK (3)
from underside of sink or mounting surface. Hand
tighten LOCKNUT (7).
Use a screwdriver to tighten SCREWS (8) on
LOCKNUT (7). Work your way around LOCKNUT (7),
tightening the screws slightly each time until all
are snug to ensure even pressure.
Instructions
Channel Locks
Make certain
seat SPOUT BASE onto
Do not use putty.
Installation
4433.350
4433.350F15
Adjustable Wrench
CAUTION
A
4
5
6
7
8
Certified to comply with ANSI A112.18.1M
Plumbers' Putty or Caulking
Turn off hot and cold water
supplies before beginning.
B
2
1
4
P U T T Y
3
5
6
7
8
M965242 REV. 1.5
2
3