Changing The Display; Using The Sleep Timer - Sony STR-DH100 Operating Instructions Manual

Otber Operations
Changing the display
You can check the volume leveL etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
All inputs except the FM and AM
band
Index name of the input
a
) -+
Selected input
-+
Volume level
FM and AM band
Program Service name b ) or preset station
name
a
)
-+
Frequency
-+
Program Type
indication b )
-+
Radio Text indication b )
-+
Current Time indication (in 24-hour system
mode)b)
-+
Volume level
a)
Index name appears only when you have assigned
one to the input or preset station (page 19, 24).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
b)Ouring ROS reception only (models of area code
CEl, CEK only) (page 25).
Note
Character or marks may not be displayed for some
languages.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 - 1-30-00
-+
1-00-00
-+
0-30-00
-+
OFF
When Sleep Timer is being used, "SLEEP"
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
27
GB
•
o
-
: ::r
C' D
"""
o
"C
C' D
"""
S»
-
o
::J
en