3: Connecting The Audio/Video Components - Sony STR-DH100 Operating Instructions Manual

•
*
Super Audio
L
CD player,
CD player
TV
DIGITAL
MEDIA PORT
adapter
o
Audio cord (not supplied)
4)
Video cord (not supplied)
*
The type of connector varies depending on the
DIGITAL MEDIA PORT adapter.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
page 14 Video components
• DVD player, Blu-ray disc player
• Satellite tuner, Set-top box
• DVD recorder, VCR
Audio components page 13
• Super Audio CD player,
CD player
• MD deck, Tape deck
• DIGITAL MEDIA PORT adapter
This section describes how to connect your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
the audio/video components.
After connect all your components, proceed to
"4: Connecting the antennas (aerials)" (page
15).
Component to be connected See
.Connecting audio components
3: Connecting the audio!
video components
The following illustration shows how to
connect a Super Audio CD, CD player, MD
deck, tape deck and DIGITAL MEDIA PORT
adapter.
You can also view the images on the TV
screen by connecting the video output of the
DIGITAL MEDIA PORT adapter to the video
input of the TV. However, depending on the
DIGITAL MEDIA PORT adapter, video
output may not be possible.
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
continued-----
13 GB