How To Steam - Singer SteamWorks Pro Instruction Manual

Garment steamer
Hide thumbs Also See for SteamWorks Pro:
Table of Contents

Advertisement

Fill the Water Tank.
Expand the Telescopic Pole by unlocking the clips and fully extending the
pole. Lock clips to secure.
Plug in the power cord to a grounded electrical outlet and turn on the power
at the ON/OFF switch. The Power Indicator Light will glow.
The unit will be ready to use in just 45 seconds.
Hang the garment on the Rotating Hanger. you may also use a clean, rust-
free clothes hanger, and place the hanger on the Clothes Hanger Hook.
Place the protective glove on the hand that will be holding the garment.
Hold the Steam Head with the steam vents pointing away from your body.
Touch the Steam Head to the garment lightly, moving it in an up and down
vertical motion, beginning at the bottom of the garment and moving upward.
Steam will rise along the inside and outside of the fabric to remove wrinkles.
Continue to steam the garment, smoothing with your free (gloved) hand.
Repeat until fabric is wrinkle free.
When finished, switch the power off at the On/Off Switch.
Unplug the steamer.
Hang the Steam Head on the Steam Head Hanger when not in use.
Empty the Water Tank before storing.
8

HOw TO STEAM

O N
O F F

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents