Folding Hanger Assembly; Garment Clips Assembly And Use - Singer SteamWorks Pro Instruction Manual

Folding Hanger Assembly

• Secure the Steam Head Hanger assembly to the Telescopic Pole.
• Tilt the hook of the Rotating Hanger and insert it into the hole on the flat side
of the Steam Head Hanger. Press gently to lock.
• Pull the arm of the Rotating Hanger up until the sides are completely extended.
• Lock the horizontal bar in place by aligning the dots on the bar.

Garment Clips Assembly and Use

• Snap the Garment Clips into the holes on the horizontal bar of the Folding Hanger.
• Clip the Garment Clip Bar to the bottom of the Telescopic Pole.
• To use, hang the garment from the top clips and secure with the bottom clips,
pulling the garment taut to steam or crease.
6
wARNINg: ALWAyS TURN OFF THE STEAMER BEFORE ATTACHING
ACCESSORIES TO AVOID INjURy.