Crease Attachment Assembly And Use; Fabric Brush Assembly And Use - Singer SteamWorks Pro Instruction Manual

Crease Attachment Assembly and Use

• Turn the steamer off and wait until there is no steam coming from the Steam
Head. And it is completely cool to the touch.
• Connect the flute of the Crease Attachment to the pegs at the bottom of the
Steam Head.
• Push the Crease Attachment into place gently until it clicks?
• To use, place the fabric between the Steam Head and the Crease Attachment to
create the crease. Move the Steam Head in a vertical motion to press the crease.

Fabric Brush Assembly and Use

• Turn the steamer off and wait until there is no steam coming from the Steam
Head and it is completely cool to the touch.
• Insert the pegs on the Fabric Brush into the holes in the Steam Head.
• Steam as usual, using the Fabric Brush to smooth stubborn wrinkles.
5