Assembly; Assembling Your Steamer - Singer SteamWorks Pro Instruction Manual

Assembling Your Steamer

• Remove all packaging.
• Place the steamer base on the floor and remove the Water Tank.
• Insert the Telescopic Pole into the Pole Base and twist the ring clockwise to lock.
• Connect the Clothes Hanger Hook to the top of the Telescopic Pole as shown.
• Expand the Telescopic Pole by unlocking the clips and fully extending the
pole. Lock clips to secure.
• Attach the Cool Touch Hose by pushing the hose onto the Hose Base and
turning _ turn clockwise to lock.
• Hang the Steam Head on the Steam Head Hanger.
wARNINg:
ALWAyS HANG THE STEAM HEAD ON THE STEAM HEAD HANGER WHEN
NOT IN USE TO PREVENT INjURy AND SURFACE DAMAGE.
MAKE SURE THE TELESCOPIC POLE IS FULLy ExTENDED DURING USE TO
ENSURE A SMOOTH STEAM FLOW THROUGH THE HOSE.
DO NOT PULL THE HOSE WITH ExCESSIVE FORCE OR MOVE IT By PULLING
ON THE HOSE. DAMAGE OR INjURy MAy RESULT.
4

ASSEMblY

O N
O F F
O N
O F F