Servicing Fixtures And Tools; Re-Write For Dvd Firmware - Toshiba SD-130ESE Service Manual

JG155B Remote control JIG
Ref. No. Part No.
JG155B
APJG155B00
JG176
APJG176031
Turn on the power.
1.
Confirm that the "No Disc" will be appeared on the screen.
2.
3. Open the DVD tray.
4. Place the Up-Date Disc and close the tray. (Refer to SERVICING FIXTURE AND TOOLS)
The reading will start and the Fig. 1 screen will appear.
Firmware upgrade
Cancel
Fig. 1
5. Select the "Start" with right ( ) key of the normal remote control, then press the ENTER key.
The data reading will start.
At this time, the horizontal noise lines may appear. But no problem.
After the finishing of the data reading, the tray will open automatically and power it off.
Remove the Up-Date Disc.
6.
After the write, set to the initializing of shipping.
7.
Turn on the power, then press the "FACTORY INITIALIZE" key on the remote control JIG (JG155B) for more than 1 second.
Press the channel (7) key on the normal remote control. If the "Complete" appears on the TV monitor, power it off.
8.
9. CHECK FOR THE FIRMWARE VERSION
Turn on the power, then press "CHECK SUM" key on the remote control JIG (JG155B) for more than 1 second.
Firmware version will be displayed on the top left of the screen.
No Disc
DAL31085
Fig. 2
When the changed version displays, the Re-write will be completed.
10. Turn off the power

SERVICING FIXTURES AND TOOLS

JG176 Up-Date Disc
Parts Name
Remote control JIG
Up-Date Disc

RE-WRITE FOR DVD FIRMWARE

Start
D A L 3 1 0 8 5
Fixed
Release date (Example: 2003.1.8)
Check for the Firmware version
Up-Date of the Firmware
Up-Date of the Firmware
Released times on the same date
A = October
B = November
C = December
C-1
Remarks