Audio Settings; Output Video Format; Hdmi Deep Color Output; Pause Mode - Sony BDP-S590 Operating Instructions Manual

• [Output Video Format]
[HDMI]: Normally select [Auto]. Select
[Original Resolution] to output the
resolution recorded on the disc. When
the resolution is lower than the SD
resolution, it is scaled up to the SD
resolution.
[Video]: Automatically sets the lowest
resolution.
• [BD-ROM 24p Output]
[Auto]: Outputs 1920 x 1080p/24 Hz
video signals only when connecting a
1 OS0/24p-compatible TV using the
HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not
compatible with 1 080/24p video signals.
• [DVD-ROM 24p Output]
[Auto]: Outputs 1920 x 1 080p/24 Hz
video signals only when connecting a
1 080/24p-compatible TV using the
HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1 080/24p video signals.
• [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the
connected TV type, and switches to the
matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Outputs RGB video signals.
• [HDMI Deep Color Output]
[Auto]: Normally select this.
[ 16bit]/[ 12bit]/[ 1 Obit]: Outputs 16bit/
12bit/10bit video signals when the
connected TV is compatible with Deep
Color.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
• [Pause Mode]
[Auto]: Normally select this. Dynamic
moving pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
~,> [Audio Settings]
• [Audio (HDMI)]
[Auto]: Normally select this. Outputs
audio signals according to the status of
the connected HDMI device.
[PCM]: Outputs PCM signals from the
HDMI OUT jack.
• [DSD Output Mode]
[On]: Outputs DSD signals from the
HDMI OUT jack when playing a Super
Audio CD. When [On] is selected, no
signal is output from other jacks.
[Off]: Outputs PCM signals from the
HDMI OUT jack when playing a Super
Audio CD.
• [B.D Audio MIX Setting]
[On]: Outputs the audio obtained by
mixing the interactive and secondary
audio to the primary audio.
[Off]: Outputs the primary audio only.
-Select this to output HD audio signals to
an A V amplifier (receiver).
(I)
CD
-
=
=
CQ
fn
Q) =
ca.
>
.!:
c
fn
-
3
CD =
-
f n
29