Table of Contents
Advertisement
Connections (Continued)
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the supplied
audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD Player's DIGITAL AUDIO
1 1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical O or coaxial X) audio cable.
You will need to activate the player's digital output.
2 2
(See Digital Audio Output on page 15).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
12
Rear of DVD player
VIDEO
DIGITAL
OUTPUT
OUT
S-VIDEO
COMPONENT /
PROGRESSIVE
OPTICAL
SCAN
O
X
OPTICAL
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
DIGITAL
AUDIO
COMPONENT
OUT
OUT
VIDEO OUT
Pr
COAXIAL
L
Pb
R
Y
S-VIDEO
VIDEO
PROGRESSIVE
OUT
OUT
SCAN
A
R
L
AUDIO INPUT
Advertisement
Table of Contents
