Rear Panel - Zenith DVB216 Installation And Operating Manual

Rear Panel

Select either S-VIDEO OUT or COMPONENT
VIDEO OUT/PROGRESSIVE SCAN, depending on
how you connected the DVD Player to the TV.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio
equipment.
Connect to a TV with S-Video inputs.
Dust protection cap
Remove the dust protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
Dust protection cap
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
10
VIDEO OUTPUT Switch
VIDEO
DIGITAL
OUTPUT
OUT
S-VIDEO
COMPONENT /
PROGRESSIVE
OPTICAL
SCAN
S-VIDEO OUT
Connect to a TV with video inputs.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver, or stereo
system.
DIGITAL AUDIO
COMPONENT
OUT OUT
VIDEO OUT
Pr
L
COAXIAL
Pb
R
Y
S-VIDEO
VIDEO
PROGRESSIVE
OUT OUT
SCAN
Plug into the power source.
VIDEO OUT
AC Power Cord