Connection Steps - CANARY AUDIO CA-903 Owner's Manual

CONNECTION STEPS:

1. Place the CA-903-L and CA-903-P in a rack or on a shelf. The CA-903-L
and CA-903-P do not require a special rack or cabinet for installation.
2. Neatly arrange and organize wiring to and from the preamplifier and all
components. Separate the AC wires from any audio cables to prevent
hum or other unwanted noise from being introduced into the system.
3. Turn off any associated components prior to connecting the CA-903-L and
CA-903-P. This minimizes the chance of momentary electrical surges
disturbing your system.
4. Connect the supplied DC power cables to the left and right DC power
output receptacles on the back of the CA-903-P.
5. Connect the other end of the DC power cables to the left and right DC
power input receptacles on the back of the CA-903-L.
6. Connect the left and right analog audio outputs from all audio source
equipment to any of the inputs on the back of the CA-903-L.
7. Connect the left and right analog audio outputs from the back of the
CA-903-L to the inputs of an audio amplifier.
8. With the power switches in the OFF position, attach the power cords to the
CA-903-P and connect them to your AC outlet.
9. Turn on the main power switches. The CA-903 will take approximately 60
seconds to initialize before it is ready for use.
10. Select the desired input signal manually using the front panel input
selector knobs.
11. Use the front panel volume control knobs to set the volume to a
comfortable level.