Connection Steps - CANARY AUDIO C900 Owner's Manual

CONNECTION STEPS:

1. Place the C900-L and C900-P in a rack or on a shelf. The C900-L and
C900-P do not require a special rack or cabinet for installation.
2. Neatly arrange and organize wiring to and from the preamplifier and all
components. Separate the AC wires from any audio cables to prevent
hum or other unwanted noise from being introduced into the system.
3. Turn off any associated components prior to connecting the C900-L and
C900-P. This minimizes the chance of momentary electrical surges
disturbing your system.
4. Connect the supplied DC power cable to the DC power output
receptacle on the back of each of the C900-P.
5. Connect the other end of the DC power cable to the DC power input
receptacle on the back of each of the C900-L.
6. Connect the left and right audio outputs from all audio source equipment
to any of the inputs on the back of the C900-L.
7. Connect the left and right audio outputs from the back of the C900-L to the
inputs of an audio amplifier.
8. With the power switch in the OFF position, attach the power cord to the
C900-P and connect it to your AC outlet. The power LED should be
illuminated in blue once the C900 is connected to a AC power source.
9. Press the power button on the C900-P to switch on both units. The power
LED should change from blue to red once the C900 is powered ON. The
C900-L will default to the input labeled as (CD) when it is first power on.
10. Select the desired input signal manually using the front panel input select
knob or the remote input selection keys.
11. Use the front panel volume control knob or the remote volume level keys
to set the volume to a comfortable level.