Do you have a question about the HB-165 and is the answer not in the manual?
Questions and answers
Debbie Billiodeaux
February 6, 2025
I can not unscrew the safety cap to refill with water
1 comments:
Mr. Anderson
February 10, 2025
To unscrew the safety cap on the Hamilton Beach HB-165 to refill it with water, follow these steps:
1. Unplug the power supply. 2. Relieve the pressure by pressing the steam delivery button. 3. Allow the steam cleaner to cool down for five minutes. 4. Press the steam delivery button again to release any remaining pressure. 5. Slowly unscrew the safety cap and wait 30 seconds before removing it.
WELCOME! Congratulations, you have acquired a high-quality Hamilton Beach® steam Cleaner. This unit is packed with many features that you will find convenient to use. It will provide you with trouble-free use if you follow the safety precautions and operating instructions provided in this easy-to-use manual.
1. IMPORTANT SAFEGUARDS WARNING! Shock Hazard: Always unplug the steam cleaner from the electrical outlet before opening the container, or before connecting/disconnecting the attachments. When using the steam cleaner, basic safety precautions should always be observed, including the following. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING! To reduce the risk of fire, electric shock, or injury: always fully extend the power cord before use.
Page 4
14. do not use the steam cleaner if it has been dropped, damaged, left outdoors or dropped into water. 15. do not use the steam cleaner with a damaged cord or plug. If the cord or plug is damaged, it must be replaced by a recommended service agent. 16.
2. PARTS AND ACCESSORIES steam cleaner elbow nozzle* Power indicator light 10. straight nozzle* Handle 11. scrub brush* steam delivery button 12. Glass cleaning tool* safety cap* Measuring cup* flexible hose* Power cord fabric nozzle tool* funnel* fabric cover* *Replacement parts or accessories can be purchased at an authorized dealer. Call 1-888-960-0396 to find one nearest you.
3. HOW TO ASSEMBLE WARNING! Shock Hazard: Always unplug the steam cleaner from the electrical outlet before opening the container, or before connecting/disconnecting the attachments. Unpack the steam cleaner. b. Remove the safety cap and check to make sure nothing is in the container. Take the accessories out.
Preparing the Steam Cleaner 1. Unscrew the safety cap. (Before the first use, turn the appliance over in order to completely empty the steam cleaner.) 2. fill the measuring cup with water to the marked waterline. (fig. 4/1) fig 4/1 3.
4. Turn the safety cap slowly a half turn and wait for the hissing noise created by any residual steam to stop. Unscrew the cap without removing it, wait 30 seconds and then take off the cap and allow to cool. 5.
Page 9
• Elbow nozzle – Attaches to the straight nozzle for cleaning small spots. • Scrub brush – Attaches to the straight nozzle for scrubbing small areas. • Fabric cover – Attaches to the fabric nozzle tool to clean smooth surfaces. • Glass cleaning tool – Attaches to the fabric nozzle tool to clean windows and counters. NOTICE: Do not use the glass cleaning tool on cold glass as it may break the glass. 1. attach the fabric nozzle tool to either the steam cleaner or the flexible hose. 2.
WARNING! Shock Hazard: Never immerse the steam cleaner, cord or plug in water or any other liquid. 7. TROUBLESHOOTING WARNING! Shock Hazard: To reduce risk of personal injury, unplug steam cleaner before servicing. PROBLEM CAUSE SOLUTION The steam cleaner won’t run It is not properly plugged into the Plug in firmly.
Limited Warranty What this limited warranty covers: The manufacturer warrants that your Hamilton Beach® steam cleaner, model HB-165, for a period of one year from the date of original purchase, will be free from all defects in material and workmanship. This limited warranty is granted only to the original consumer purchaser or gift recipient.
Page 12
This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. Hamilton Beach® is a registered trademark of Hamilton Beach Brands, Inc. used under license by essCO.
Need help?
Do you have a question about the HB-165 and is the answer not in the manual?
Questions and answers
I can not unscrew the safety cap to refill with water
To unscrew the safety cap on the Hamilton Beach HB-165 to refill it with water, follow these steps:
1. Unplug the power supply.
2. Relieve the pressure by pressing the steam delivery button.
3. Allow the steam cleaner to cool down for five minutes.
4. Press the steam delivery button again to release any remaining pressure.
5. Slowly unscrew the safety cap and wait 30 seconds before removing it.
This answer is automatically generated