Connecting A Video Device - InFocus LP 850 User Manual

Infocus user's guide projector lp 840 lp 850 lp 860
Hide thumbs Also See for LP 850:
Table of Contents

Advertisement

LP840-850-860 User's Guide-02.fm Page 14 Friday, February 25, 2005 12:58 PM

Connecting a video device

Standard video connections
Plug the audio/video (A/V) cable's yellow connector into the video-out
connector on the video device. Plug the other yellow connector into the yel-
low Video 3 connector on the projector. Plug a white connector into the left
audio out connector on the video device and plug a red connector into the
right audio out connector on the video device. Plug the remaining white
connector into the left audio in connector on the projector, and plug the red
connector into the right audio in connector on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet. NOTE: Always use the power cable that
shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an
S-video cable (sold separately) into the S-video connector on the video
device and into the Video 2 connector on the projector. Use the A/V cable's
audio connectors as described directly above (the yellow connectors on the
A/V cable are not used).
If the video device uses component cable connectors (sold separately), plug
the cable's green connectors into the green component-out connector on the
video device and into the Video 1 green component connector (labeled "Y")
on the projector. Plug the component cable's blue connectors into the blue
component-out connector on the video device and into the blue component
connector (labeled "Pb") on the projector. Plug the component cable's red
connectors into the red component-out connector on the video device and
into the red component connector (labeled "Pr") on the projector. Use the
A/V cable's audio connectors as described above (the yellow connectors on
the A/V cable are not used). NOTE: The component connectors can be used
for HDTV sources (480i, 480p, 720p and 1080i formats).
connect A/V cable
connect power cable
connect S-video and video cables
connect component cables
and video cables
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lp840Lp860

Table of Contents