Indicators - InFocus LP1200 User Manual

Indicators

The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
INDICATOR
TEMP
INDICATOR
LAMP
INDICATOR
POWER
INDICATOR
44
LAMP TEMP
RGB
VIDEO
SHOWS
• Unusual temperature
The power is turned off and
the POWER indicator lights
up red.
• The ventilation slots or air
filter is clogged with dust or
debris.
blinking red
• The fan has stopped due to
an impediment.
• The location temperature is
too high.
• The filter is dirty.
Normal
Steady green
Blinking red/green Lamp is almost used up.
or Blinking red
• Lamp is used up.
Steady red
The power is not turned on.
•
(Power indicator lights up red.)
Steady red
Standby
Steady green Power-on
• The filter cover is not closed.
(When the TEMP indicator and
Blinking red/green
the LAMP indicator are off.)
or Blinking red
• Abnormal
(When the TEMP indicator or
the LAMP indicator steady on or
blinking.)
CONDITION
• Close the cover correctly.
• Contact your dealer.
POSSIBLE SOLUTIONS
• Remove the object from
the ventilation slot.
• Pull out the power
plug and remove the
object. If you cannot,
consult your dealer.
• Relocate the projector
to a cooler place.
• Clean the filter.
-
Replace the lamp.
Exchange with a new
lamp if the same
problem recurs.
-
-