(2) Put the oil pan
2b 2b
fix it by nails
(3) put the machine casting hinge cushion
the cutouts of table and fix it by nails
2. Installing the machine head (Fig. 3)
3 3
(1) Insert the knee lifting rod
(2) Insert the casting hinge
bed;
(3) Put the hinge
head on the pad
(4) Inset the machine head supporter in the table.
Notice:
Be sure to full inset the supporter in the table
Otherwise it may cause danger while put the
machine head down.
into the cutouts of table
;
.
;
to the hole in the
in the cushion
;
and
into
and put the