EY6105-X8 3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS IHOW TO DISASSEMBLE KEYLESS CHUCK. Ref. No. 1A Procedure 1A Removal of the Keyless Drill Chuck. 1. Set the clutch handle to position and select "LOW" position. 2. Turn the lock collar counterclockwise direction to open the chuck jaws.
EY6105-X8 IHOW TO DISASSEMBLE MAIN UNIT. Ref. No. 2A Procedure 2A Removal of the Housing. 1. Remove 8 housing screws. (See or Fig.4) Fig.4 Procedure 2A → → → → 2B Ref. No. 2B Removal or attachment of the Motor.
EY6105-X8 Procedure 2A → → → → 2B → → → → 2C Ref. No. 2C Removal or attachment of the Gear Box Block. (Removal) 1. Turn the thrust plate to remove. 2. The internal parts of gear box block can be removed one after another.
EY6105-X8 Ref.No.2D Procedure 2A → → → → 2B → → → → 2C → → → → 2D Assembly of the Adjusting Screw and the Clutch Handle. 1. Align the mark of adjusting screw with the projection (A) of driving block.
EY6105-X8 4 TROUBLESHOOTING GUIDE (Refer to WIRING CONNECTION DIAGRAM) < TROUBLE > < CHECK > < REMEDY > Does not operate. <CHECK BATTERY PACK.> NO Replace battery pack. → If no less than 12V DC is available across the (+) and (-) terminals, →...
EY6105-X8 6 REPLACEMENT PARTS LIST NOTE: *B=only available as set *C=available individually Ref.No. Part No. Part Name & Descriptions Remarks Per Unit WEY6105K3079 HOUSING AB SET for EUROPE WEY6105K3070 HOUSING AB SET for OCEANIA WEYT103L6807 CHUCK FASTENING SCREW WEY6105K7918 KEYLESS CHUCK...