Table of Contents
Advertisement
How To Replace Brush Roll Belt
7. Place new belt around motor pulley.
End Cap
(Left)
10. Pull right side of brush roll to stretch belt. Secure right
end cap of brush roll into base.
Use GENUINE EUREKA replacement belt, 54312. Look for the GENUINE EUREKA PRODUCT symbol.
(continued)
Belt
Detail
7
End Cap
8. Place belt around the pulley at the right end of the brush
9. Align left end cap of brush roll with square in base.
10
End Cap
(Right)
11. Rotate the brush roll at least three revolutions to seat
12. Replace the hood onto the cleaner. Make sure the front
13. Tighten screws.
9
Brush Roll
(Left)
roll.
See Detail 9. Slide end cap into place.
12
the drive belt.
of the hood is behind the furniture guard.
8
11
Rotate
11
Advertisement
Table of Contents
