Making Ice - Mitsubishi Electric MR-E62S Operating Instructions Manual

1
Press
panel and select
2
Make sure that
control panel is not on.
z
If the lamp is on, insert the ice tray and lock
the ice tray lock lever.
Page 26
3
Remove the water tank.
Water tank
z When carrying the water tank, hold the tank with both hands.
Note
(If you hold the lid, the tank may fall and cause an injury.)
Stopping ice making
Empty the ice tray and water tank.
1
Set the ice making setting of the
ice making compartment to
2
Remove the water tank and
empty the water.
Water tank
3
Remove the ice tray and empty
the water and ice.
z
For details on removal, see the page that
describes the cleaning methods.
z Wash the water tank, water supply pipe and ice tray before making ice for the fi rst time, or
Note
if you have not made ice for more than a week. Odors or dust may be adhered to the parts.

Making ice

on the control
or .
Page 13
on the
.
Page 13
Page 26
4
Slide the water tank cap
and pour water into the
water supply port up to the
full position.
z
If water is fi lled beyond the full position,
water may spill when you carry or tilt
the tank. Further, it may cause the water channels in the ice
tray to freeze, or the ice to join together or form a protrusion.
WARNING-Fill with potable water only.
5
Close the water tank cap, and while holding
the water tank horizontally, push it in until
it makes contact with the inner side.
z
If there is a gap between the water tank and the water
supply pipe, the water tank may freeze.
Check that there are no foreign objects between the tank
holder and the water supply pipe area.
z
Push in the water tank until it makes contact with the
inner side. Setting the water tank incorrectly may
prevent ice from forming.
Return the water tank to its original position
(When not using for a long time)
4
Remove the ice
storage box and empty
the water and ice.
z
Do not dispose of the
soundproof mat.
5
Wash the water tank
pipe, optical catalyst and lead-cleaning fi lter)
water supply pipe, ice storage box,
soundproof mat, ice tray and ice server,
dry them completely, and then return
them to their original positions.
Page 27
z
If the water tank is not
returned to its original
position, the food
inside the refrigerator
compartment may freeze.
Water supply port
Full position
Page 26
Ice storage
box
(water supply pump,
,
Return the water tank to its
original position
25