JRC FF50 Service Manual page 6

When removing the power cord, be sure to
remove the power cord terminal correctly.
Pulling the power cord can damage it
resulting in a fire or an electric shock.
•@
Do not bring the set in a cooled state
suddenly into a warm room.
A high voltage may leak due to dew
condensation resulting in a failure.
case, use the set after leaving it alone for 30
minutes.
When cleaning the surface, do not use any
organic solvent such as thinner or benzene.
Otherwise, the painting on the surface may
be damaged.
For cleaning the surface, remove the dust,
then wipe with clean dry cloth.
CAUTION
4
No
In this
Thinne
r