JVC KS-FX845R Service Manual page 132

• When the current disc is a CD:
Playback starts from the first track of the
current disc.
Disc number
If you have selected "TIME" for "CH DISP" (see
page 25), the display changes as follows:
Elapsed playing time Track number
Notes:
• When you press TAPE (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
• If you change the source, CD changer play also
stops. Next time you select the CD changer as the
source, CD changer play starts from where
playback has been stopped previously.
To fast-forward or reverse the track/file
Note:
During this operation on an MP3 disc, you can only
hear intermittent sounds. (The elapsed playing time
also changes intermittently on the display.)
28
Track number
Press and hold ¢
during play, to fast-forward
the track/file.
Press and hold 4
during play, to reverse the
track/file.
To go to the next or previous tracks/files
Press 4
to the beginning of the current track/file.
Each time you press the button consecutively,
the beginning of the previous tracks/files is
located and played back.
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the
CD changer is playing).
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.
,
,
Press ¢
briefly during
play, to skip ahead to the
beginning of the next track/
file.
Each time you press the
button consecutively, the
beginning of the next
tracks/files is located and
played back.
briefly during play, to skip back