1. Manuals
  2. Brands
  3. Maktec Manuals
  4. Sander
  5. MT923
  6. Instruction manual

Maktec MT923 Instruction Manual

Double insulation finishing sander
Hide thumbs Also See for MT923:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Finishing Sander
MT923
011316
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT923 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Maktec MT923

Summary of Contents for Maktec MT923

  • Page 1 INSTRUCTION MANUAL Finishing Sander MT923 011316 DOUBLE INSULATION IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model MT923 Pad size 92 mm x 185 mm Abrasive paper size 93 mm x 228 mm Orbits per minute (min 12,000 Overall length 252 mm Net weight 1.4 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

  • Page 3: Sander Safety Warnings

    If operating a power tool in a damp location is accessories, or storing power tools. Such unavoidable, use a residual current device preventive safety measures reduce the risk of (RCD) protected supply. Use of an RCD reduces starting the power tool accidentally. the risk of electric shock.

  • Page 4: Functional Description

    may cause a personal injury. Open the paper clamp by raising on the lever to release from the locking port and then insert the paper end into SAVE THESE INSTRUCTIONS. the clamping part, aligning the paper edges even and parallel with the sides of the base. (Bending the paper WARNING: beforehand makes attachment easier).
  • Page 5 Attach the dust bag onto the dust spout. The dust spout 1. Screwdriver is tapered. When attaching the dust bag, push it onto the 2. Screws dust spout firmly as far as it will go to prevent it from coming off during operation. For the best results, empty the dust bag when it becomes approximately half full, tapping it lightly to remove as much dust as possible.

  • Page 6: Sanding Operation

    replacement parts. 009093 Remove the filter first by pinching the logo side of its cardboard lip, then by pulling the cardboard lip downwards to move it out of the holding tab of the dust box. OPERATION Sanding operation 011319 CAUTION: Never run the tool without the abrasive paper.
  • Page 8 Makita Corporation www.makita.com 884981B4...

Table of Contents