Subscribe to Our Youtube Channel
Related Manuals for Maktec MT925
Summary of Contents for Maktec MT925
- Page 1 INSTRUCTION MANUAL Finishing Sander MT925 013000 DOUBLE INSULATION IMPORTANT: Read Before Using.
- Page 2 ENGLISH (Original instructions) SPECIFICATIONS Model MT925 Pad size 112 mm x 102 mm Orbits per minute (min 14,000 Dimensions (L x W x H) 110 mm x 112 mm x 133 mm Net weight 0.89 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice.
- Page 3 moving parts. Damaged or entangled cords be controlled with the switch is dangerous and increase the risk of electric shock. must be repaired. When operating a power tool outdoors, use an 20. Disconnect the plug from the power source extension cord suitable for outdoor use. Use of and/or the battery pack from the power tool a cord suitable for outdoor use reduces the risk of before making any adjustments, changing...
- Page 4 GEB021-4 FUNCTIONAL DESCRIPTION SANDER SAFETY WARNINGS Always use safety glasses or goggles. Ordinary WARNING: eye or sun glasses are NOT safety glasses. Always be sure that the tool is switched off and • Hold the tool firmly. unplugged before adjusting checking Do not leave the tool running.
- Page 5 OPERATION Sanding operation 013003 CAUTION: Never run the tool without the abrasive paper. You • may seriously damage the pad. Never force the tool. Excessive pressure may • decrease the sanding efficiency, damage the abrasive paper and/or shorten tool life. Hold the tool firmly.
- Page 8 Makita Corporation www.makita.com 885136-4...
Need help?
Do you have a question about the MT925 and is the answer not in the manual?
Questions and answers