Connections - Onkyo SKW-770 Instruction Manual

Connections

For safety considerations, turn off all other system
components before you connect or disconnect any
component and plug the power cord for the last.
Using the SKW-770 with an AV
amplifier
When using the SKW-770 in conjunction with an AV
amplifier or receiver that features surround capability,
connect the SKW-770 LINE INPUT to SUBWOOFER
PREOUT jack using the supplied pin connector cable.
SKW-770
Caution
• With other audio-video components, connect the subwoofer's
LINE INPUT to the subwoofer pre out jack of your equipment.
Never plug any kind of musical instrument to the subwoofer.
SUBWOOFER
PREOUT
(Supplied)
Connecting the Power Cord
1
Connect the supplied power cord to the subwoofer's
AC INLET.
To AC wall outlet
2
Plug the power cord into an AC wall outlet.
Note
• Before connecting the power cord, connect all of your
speakers and AV components.
• Turning on the subwoofer may cause a momentary power surge
that might interfere with other electrical equipment on the same
circuit. If this is a problem, plug the subwoofer into a different
branch circuit.
• Do not use a power cord other than the one supplied with the
subwoofer. The supplied power cord is designed exclusively for
use with the subwoofer and should not be used with any other
equipment.
• Never disconnect the power cord from the subwoofer while the
other end is still plugged into a wall outlet. Doing so may cause
an electric shock. Always disconnect the power cord from the
wall outlet first, and then the subwoofer.
En
5