Page 1
Powered Subwoofer English ... En-1 SL-107 Instruction Manual Thank you for purchasing an Onkyo powered subwoofer. Please read this manual thoroughly before using the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new powered subwoofer.
SL-107_Chi.book Page 1 Tuesday, September 30, 2003 2:43 PM WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
• Four slip-proof spacers are provided with the SL-107. If the SL-107 is to be placed on flooring or other sim- ilar surfaces, attach these spacers to the bottom sur- face at the corners. This will not only prevent scratching, but also provide a stable footing.
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY ONKYO EUROPE ELECTRONICS GmbH I.
200 Hz, depending on the characteristics of the speaker system. 3 PHASE switch Use this switch to reverse the phase of the SL-107. Normally, set the switch to the “NOR” position. Depending on the connected speakers or the instal- lation environment of the SL-107 however, the “REV”...
Using the SL-107 with an AV amplifier When using the SL-107 in conjunction with an AV amplifier or receiver that features surround capability, connect the SL-107 to SUBWOOFER PREOUT jack using the supplied pin connector cable.
Page 7
SL-107_Chi.book Page 6 Tuesday, September 30, 2003 2:43 PM Connections —Continued Connecting to speaker terminals on an amplifier (or receiver) 1. Using the speaker cables, connect the SL-107 SPEAKER LEVEL INPUT terminals to the ampli- fier’s speaker terminals. 2. Using the speaker cables, connect the right and left speakers to the SL-107 SPEAKER LEVEL OUT- PUT terminals.
Curve is raised Adjustments Crossover frequency and output level • Adjust the SL-107 output level and crossover fre- quency to suit your listening room and connected speakers. • When the unit is connected to an amplifier via the...
• Pin connector cable is not inserted completely. ➞ Fully insert the pin connector cable. • External leakage flux (induction noise by TV, etc.) occurs. ➞ Relocate the SL-107 away from the noise source and re-connect. Specifications Type Bass-reflex with built-in power amplifier...
Need help?
Do you have a question about the SL-107 and is the answer not in the manual?
Questions and answers