NEC AccuSync LCD71VM Service Manual page 59

1 2 3 4
H FR EQ STABLE
V FREQ STABLE
STABLE COUN T
H FR EQ UN STABLE
V FREQ UNSTABLE
UN STABLE COUN T
1 2 3 4
HOUR S RUNN ING(FAC T)
ON 1 05H
O FF 2 24H
F/W VERSION:V0.28
H FREQ STABLE: Input signal stable condition from unstable.
5 6 7
2
V FREQ STABLE: Input signal stable condition from unstable.
1
4
2
1
STABLE COUNT: Input signal stable condition from unstable.
1
H FREQ UNSTABLE: Input signal unstable condition from
V FREQ UNSTABLE: Input signal unstable condition from
UNSTABLE COUNT: Input signal unstable condition from
ON: Total accumulated time during the reception of input
5 6 7
OFF: Accumulated time in the power-saving mode and soft
4 5M
4 0M
* The accumulated time (hours running) is not reset even
F/W VERSION: Firmware version
Initial: 2
Initial: 1
Initial: 4
stable.
stable.
stable.
signals (LED: green)
power off mode (Only AC power input).
(LED: amber or off)
when FACTORY RESET is executed.
4-10
Initial: 2
Initial: 1
Initial: 1