Table of Contents
Advertisement
REC Quality / Resolution
You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.
Setting Standard Recording Properties
You can set each channel's resolution, quality and IPS for normal recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
2. Select <Standard>.
3. When the recording setup is done, press <OK>.
• Remaining count : If you change the settings of the
resolution and the remaining rate, the frame rate available for
each resolution will be recalculated.
The remaining frame rate for each channel is a sum of values from
both standard recording and event recording.
If the remaining rate is zero or no other page has a remaining rate available, you cannot increase the value of the
remaining rate.
If this is the case, reduce the recording count of the current page, or do so for the same channel on any other page.
Setting Event Recording Properties
You can set each channel's resolution, quality and IPS for event recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
2. Select <Event>.
Event recording setup window appears.
3. Use direction buttons ( ◄ ►) to move to a desired
item, and select it.
• Resolution : Sets the resolution of the recorded screen.
• Record Rate : Image Per Second, means the frames
recorded per a second.
• Record Quality : Sets the recording quality.
M
Only if the resolution is set to 4CIF, you can select Level 9 for the recording quality.
However, Level 9 is available only if you select a level for each and every channel.
If the resolution is set to 1CIF or 2CIF, the possible resolution is up to Level 8.
The estimated total remaining count means the total number of remaining recordings for both standard and event
recordings.
You cannot increase the remaining count if the current remaining count has reached zero or there is no available
remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so
for the same channel on any other page.
4. When the Event recording setup is done, press <OK>.
REC Quality & Resolution
Standard
Event
Remaining count : 4CIF(L) : 0
2CIF(M) : 0
CIF(S) : 0
Resolution
Record Rate
CH
1
CIF(S)
7.5ips
2
CIF(S)
7.5ips
3
CIF(S)
7.5ips
4
CIF(S)
7.5ips
5
CIF(S)
7.5ips
6
CIF(S)
7.5ips
7
CIF(S)
7.5ips
8
CIF(S)
7.5ips
Previous/Next Page
OK
Cancel
REC Quality & Resolution
Event
Standard
Remaining count : 4CIF(L) : 0
2CIF(M) : 0
CIF(S) : 0
Resolution
Record Rate
CH
1
4CIF(L)
7.5ips
2
4CIF(L)
7.5ips
3
4CIF(L)
7.5ips
4
4CIF(L)
7.5ips
5
4CIF(L)
7.5ips
6
4CIF(L)
7.5ips
7
4CIF(L)
7.5ips
8
4CIF(L)
7.5ips
Previous/Next Page
OK
Cancel
English _49
Record Quality
Level4
Level4
Level4
Level4
Level4
Level4
Level4
Level4
Record Quality
Level4
Level4
Level4
Level4
Level4
Level4
Level4
Level4
Hide quick links:
Advertisement
Table of Contents
