Advertisement
Important Notes
1) In order to horizontally flush-mount the TSS-CENTER4000 in a wall
with standard 16" spacing between the studs, some modification to
that area of the wall will be necessary.This type of installation will
require a professional licensed contractor to install horizontal braces
that comply with the customer's local building codes.
2) For a satellite installation, follow all the steps but cut the hole
in a vertical direction, perpendicular to the floor. See exploded view
on page 7.
Step One
Remove both end caps of the speaker by unscrewing the single
center screws.
Speaker
Step Two
Attach both of the end brackets to the speaker ends with the
1/4-20 x 3/4" flat-head machine screw, as shown.
1/4-20 x 3/4"
Flat-Head Machine Screw
End Bracket
:
End Cap
Center Screw
1/4-20 x 3/4" Screw
End Bracket
1/4-20 x 3/4"
Flat-Head
Machine Screw
TSS-FMK4000
3
Advertisement
