Cobra Micro Talk 2 Operating Instructions Manual page 16

FRS250 manual.final.qx 10/1/98 2:43 PM Page 32
Advanced Features
Tone Tone Setting
Settings
The Key Stroke Tone and Talk Confirmation Tone
can be temporarily turned on or off during the
operation of your MicroTalk 2 2-Way Radio.
Key Stroke Tone Indicator
BEEP
You will hear an audible tone when any button is
pushed (except PTT button). You can turn the
audible tone on or off by:
Note
The Key Stroke Tone and Talk
Confirmation Tone can be
temporarily turned on or off
at any time while in opera-
tional mode.
1 Push and hold button until icon
BEEP
Enter
disappears in the LCD display.
To return to the audible mode, push and hold
2
button until icon appears in the LCD
BEEP
Enter
display.
26
Advanced Features
Talk Confirmation Tone Indicator
To te m po ra rily eliminate the Talk Co n f i rm ation To n e :
Note
Push and re l e a s e b u t ton until icon flashes.
1
For more information see
Func
Talk Confirmation Tone
section on page 14.
Note
To restore the Talk
Confirmation Tone repeat
steps 1- 3 as shown to
the left.
2 Push and release b u t tons until icon
OFF
Channel
appears in the LCD display.
Note
When you push and hold the
PTT button,the unit exits out
to operational mode.
If, after 10 seconds no selec-
tion is made, the unit will
return to operational mode.
Push and hold button. icon will
3
Enter
disappear or press and hold function k ey to
proceed to next function.
27