Battery Low - Cobra Micro Talk 2 Operating Instructions Manual

FRS250 manual.final.qx 10/1/98 2:43 PM Page 14
Operation
Select CTCSS Se l e ct CTCSS Su bchannel (00-38) co n t i n u e d
Subchannel
Note 4 Se l e ct s u bcode number by pushing and re l e a s i n g
buttons.
Push and hold the
Channel Channel
buttons for fast channel
advance.
5 When desired code is displayed push and
release button. If key stroke tone is on,
Enter
an audible tone will confirm your selection.
8
Operation

Battery Low

Battery Low
Note
When battery capacity is at
the 1/4 level it is recom-
mended that you replace
alkaline batteries or recharge
When in normal use the icon may begin
your NiMH (Nickel Metal
flashing. This is a warning to you that your
Hydride) battery pack.
batteries are getting low.
Only the Cobra NiMH
Replace alkaline batteries as soon as possible
battery (Part # F A-BP)
and/or recharge NiMH battery pack.
pack can be recharged .
Note
NiMH rechargeable battery
Pack (item #FA-BP) and 2
port desktop charger
(item #FA-CH) are not
included with this unit.
See Accessories section on
page 37.
9