Arc Lamp Power Supply - Hughes JVC 220 Service Manual

Chapter 4---Maintenance (Removal/Replacement)
Figure 4-4. Ignitor Assembly and Arc Lamp Power Supply

4.6 Arc Lamp Power Supply

4-8
To remove the Arc Lamp Power Supply:
1. Remove the front cover (Section 4.2).
2. Remove the lower-right-front-side panel by removing
the 5 pozidrive screws securing it.
3. Remove the 2 pozidrive screws from the bottom of the
EMI shield and slide it out of the way to the left.
Model 220 Service Manual