Hardware Installation
SY-K7VIA
2. Infrared (IR1)
Plug the 5-pin infrared device cable to the SIRCON header. This will
enable the infrared transfer function. This Motherboard meets both the
ASKIR and HPSIR specifications.
Please install according to the following pin assignment:
Serial Infrared (IR1) Connector
IR1 Pin Assignment
1 2 3 4 5
VCC
IRTX
IRRX
GND
3. Other Display Cards
Insert other types of VGA cards into the PCI or ISA expansion slots
according to card specifications.
36