Welcome - NEC ND-3500A Quick Start Manual

2

Welcome

Thank you for purchasing the NEC ND-3500A DVD±R/RW DL
drive. Please remove your service tag sticker found on the outer
carton' s label. This label contains your drive' s service tag
number and model number and can be placed in the space
below or can be affixed to the outer cover of your PC. You will
need this information for product registration and to obtain
technical support service. To register this product online, please
visit www.necsam.com/registration/ Save the box that your
drive was shipped in, as NEC can not be held accountable for
damages caused by shipping in the case of a returned product.
Service Tag Number: _______________________
Purchase Date: ____________________________
FCC NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee interference will not occur in a particular
installation. If this equipment causes harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
■
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
■
Changes or modifications of this device must be approved by the party
responsible for FCC compliance, or the user loses authority to operate
this product.
LASER WARNING
Visible and invisible laser radiation. Do not open optical housing. Avoid
direct exposure to the beam.