Advertisement
Quick Links
Addonics
T E C H N O L O G I E S
Zebra Disk Array
Z4RCS25PM, Z4RCS25HPM & Z4RCS25NML
User's Guide
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try and correct the interference by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where receiver is
connected
Consult a certified television or radio technician
Version 1.0
Enclosure Overview
Drive
Drawers
Detailed View of the Front Panel of the Drive Drawer
To open the drive drawer, you need to push this portion (indicated by the arrow)
of the front panel to the left. Once the lever pops out, pull it out towards you.
Key Lock
Key Lock: Secures hard drive in the enclosure.
Power LED: Solid green when power in ON.
HDD Access LED: Amber while in activity.
Note:
There is no individual power switch for the hard drives.
Power LED
Power LED
Drive Activity LED
Advertisement
Related Manuals for Addonics Technologies Z4RCS25PM
Summary of Contents for Addonics Technologies Z4RCS25PM
- Page 1 Drawers Zebra Disk Array Power LED Z4RCS25PM, Z4RCS25HPM & Z4RCS25NML Detailed View of the Front Panel of the Drive Drawer To open the drive drawer, you need to push this portion (indicated by the arrow) of the front panel to the left. Once the lever pops out, pull it out towards you.
- Page 2 How to mount SATA drive in the drive drawer Model: Z4RCS25PM Zebra Disk Array with integrated regular Port Multiplier - Work with PM compatible controller only. The 4 drives in the Disk Array can be set up as RAID 0, 1, 5, 10, JBOD when connected to a PM compatible RAID Screw Holes controller or as individual drives via USB port.
- Page 3 Model: Z4RCS25HPM Model: Z4RCS25NML Zebra Disk Array with integrated Multilane connector Zebra Disk Array with integrated Hardware Port Multiplier - The 4 drives in the Disk Array can be set up as RAID 0, 1, 5, 10, JBOD when The 4 drives in the Disk Array can be set up as RAID 0, 1, 10, Bigdrive, or as connected to a Multilane RAID controller.
- Page 4 OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information about your problem so that we can recreate and diagnose it. FREE Software Drivers for all Addonics Technologies Products are available 24 hours per day at the World Wide Web Site: www.addonics.com.