JVC PD-42WV74 Service Manual page 13

3.1.18 THE SIDE BLACKET (Fig.4)
• Remove the REAR COVER.
• Remove the SHIELD COVER.
• Remove the TERMINAL BRACKET.
• Remove the LINE FILTER PWB.
• Remove the AUDIO PWB.
• Remove the DISPLAY INTERFACE PWB.
• Remove the CHASSIS BASE.
• Remove the BACK FRAME BRACKET.
• Remove the PDP UNIT.
(1) Remove the 2 screws [ Z ].
(2) Remove the screw [ a ].
(3) Remove the screw [ b ] attaching the earth wire.
(4) Pull up the SIDE BRACKET.
(5) Remove the other hand SIDE BRACKET same steps.
a
SIDE BRACKET
MOUNTING
BOSS
UPPER
BRACKET
GLASS HOLDER
(UPPER)
Z
c
TOP
d
3.1.19 REMOVE THE FRONT FILTER (Fig.4)
• Remove the REAR COVER.
• Remove the SHIELD COVER.
• Remove the TERMINAL BRACKET.
• Remove the LINE FILTER PWB.
• Remove the AUDIO PWB.
• Remove the DISPLAY INTERFACE PWB.
• Remove the CHASSIS BASE.
• Remove the BACK FRAME BRACKET.
• Remove the PDP UNIT.
(1) Remove the 2 screws [ c ] attaching the UPPER
BRACKET.
(2) Remove the 6 screws [ d ] attaching the GLASS HOLDER
(UPPER) from upper side.
(3) Pull up the UPPER BRACKET.
(4) Remove the 2 screws [ e ] attaching the UPPER
BRACKET.
(5) Remove the 6 screws [ f ] attaching the GLASS HOLDER
(UPPER) from under side.
(6) Take out the FRONT FILTER.
PDP UNIT
GLASS HOLDER
(UNDER)
e
UNDER
BRACKET
FRONT PANEL
Fig.4
f
Z
EARTH
WIRE
b
a
SIDE BRACKET
FRONT FILTER
(No.YA029)1-13