Sleep Timer - Philips FW-C380 User Manual

TIMER
25
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the
last tuned frequency will be switched
on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the disc
trays are empty, the TUNER will be
selected instead.
– The timer will not activate if a recording
is in progress.
To switch off the TIMER
1
Press and hold CLOCK•TIMER
for more than two seconds.
2
Press Ç on the system to cancel the
timer.
The timer is now switched off.
The display will show "OFF" and
the disappears.
TIMER
pg 01-30/C380/37-En
To start the TIMER again (for the
same preset time and source)
1
Press and hold CLOCK•TIMER
for more than two seconds.
2
Press CLOCK•TIMER again to
store the start time.
The timer is now on.
The appears on the display.
TIMER

Sleep Timer

(only on remote
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1
Press SLEEP on the remote control
repeatedly to select a period of time.
The selections are as follows (time
in minutes): 15 ™ 30 ™ 45 ™ 60
™ OFF ™ 15 ...
"SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
minutes.
25
SLEEP TIMER
2
When you reach the desired length
of time, stop pressing the SLEEP
button.
The display lights up.
SLEEP
The Sleep Timer is now set. Before
the system switches to standby
mode, a countdown of 10
seconds will be displayed.
"SLEEP 10" ™ "SLEEP 9".... ™
"SLEEP 1" ™ "SLEEP"
While SLEEP mode is activated
¶ Press SLEEP once to view the
remaining length of time.
¶ Press SLEEP twice to change the
pre-selected period of time.
The display will show the
remaining time followed by the
sequence of sleep timer options.
To switch off the Sleep Timer
¶ Press SLEEP repeatedly until "OFF"
is displayed, or press the
STANDBY-ON button.
12/6/00, 2:21 PM
3139 115 20462 (ENG)