Guide Of Storing; Storage End, Use The Motorbike - Generic Trigger X User Manual

Table of Contents

Advertisement

Guide of storing

Storing:
If need long time store, we need some maintenance action to maintain the quality of motorbike
1.
Change the oil.
2.
lubricate the driving chain
3.
empty the fuel tank and gas in the carburettor
Attention:
If the storing time is over one month, in order to maintain the performance after storing, empty the
gas in the carburetor is very important.
Alarm:
Gas is easy to burn and may blast in some condition. Please do not smoke or set fire spark when
empty the gas or oil
4.
Disassemble the spark plug, immit one spoon (15-20cm3) clean oil in the cylinder, operate the start
shaft several time in order to extend the oil, and then reassemble the spark plug.
Attention:
When turning the engine, the start switch should be set in " "place.
5.
Clean and wipe the motorbike, smear wax on the place in paint.
6.
Inflate the tire in suggested pressure. Put motorbike on the cushion in order to let the two tire off
the groud.
7.
Cover the motorbike (do not use plastic or coat material), store it in no-air condition, no-wet and
stable temperature place. Do not store the motorbike in sun light

Storage end, use the motorbike

Take off the cover and clean the motorbike, if the storing time is over 4 month, need to change oil.
Take all the check before riding, to try the motorbike in safe place in low speed.

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Generic Trigger X

This manual is also suitable for:

Trigger sm

Table of Contents