HP ExpressCard Analog Hardware Setup Manual page 31

3. Turn on your TV.
4. Be sure your TV is set to view the correct video source
(video 1, video 2, etc.).
5. Press
display your computer screen on your TV.
If you connected your TV after running the Media Center Setup
Wizard for the first time, you may need to reconfigure settings in
Media Center.
✎
If you have not run the Media Center Setup Wizard yet, you do
not need to perform the following procedure. The Media Center
Setup Wizard will walk you through all the configuration steps
required for your connection.
To configure the way Media Center is displayed on your
television, after the television is connected:
1. Open Media Center:
❏
– or –
❏
2. Select Settings > TV > Configure Your TV or Monitor.
3. Follow the on-screen instructions.
Hardware Setup
on your computer keyboard one or more times to
fn+f4
Press the START button on your remote.
From your Windows desktop, select Start > Media
Center.
Advanced connections
4–9