Table of Contents
Advertisement
✎
Hardware Reference Guide
10. If replacing or adding a new expansion card:
a. Hold the card just above the expansion slot on the system
board, then move the card toward the rear of the chassis so
that the bracket on the card is aligned with the open slot on
the rear of the chassis 1.
b. Gently press the card straight down into the expansion slot on
the system board 2.
Replacing or Adding an Expansion Card
When installing an expansion card, press firmly on the card so that
the whole connector seats properly in the expansion card slot.
11. If you are replacing an expansion card, store the old card in the
anti-static packaging that contained the new card.
www.hp.com
Hardware Upgrades
2-17
Advertisement
Table of Contents
