System Settings - Inetcam Mobile Gateway User Manual

System Settings

The System Settings administration screen is used to change system-level settings.
The Network section is used to set the IP address settings of the Mobile Gateway™ video server.
•
IP Settings: Select DHCP if the local network assigns IP addresses using a DHCP
server. Select Static to enter a fixed IP address that will not change. When using Static
IP settings, the IP Address, Subnet Mask, Gateway, and DNS Server 1 fields must be
filled in. DNS Server 2 is optional. These options may also be set using the Mobile
Gateway™ Finder utility.
The Time section is used to set the time on the Mobile Gateway™ video server. Accurate time
settings are important as this information is transmitted to viewing clients.
•
Date: Enter the local date as "month/day/year" using numbers separated by slashes.
•
Time: Enter the local time as "hour:minute:second" using numbers separated by colons.
•
Time Zone: Select the local time zone from the dropdown list of time zones available to
the Mobile Gateway™ video server.
•
Use Daylight Savings: Select Yes or No to indicate whether or not Daylight Savings
Time should be followed. (Note: If the selected time zone does not use Daylight Savings,
such as Arizona time, the "Use Daylight Savings" setting is ignored.)
Draft version 1.7
Inetcam® and iMViewer™ are the property of Inetcam, Inc.
13