Inetcam Mobile Gateway User Manual page 12

•
DDNS Hostname: Enter the hostname for the Mobile Gateway™ video server; the
default is a random value. The full name for accessing the Mobile Gateway™ video
server will be the entered value followed by ".inetcam.com" (for example:
john.inetcam.com).
•
Port: Enter the port number through which the server is accessed; the default is 80, the
standard web server port. (This will impact your router or firewall settings.)
•
iMViewer™ Hostname: This shows the full text that must be entered in the iMViewer™
software in order to access this Mobile Gateway™ video server.
The Bandwidth Control section controls bandwidth usage limitations.
•
Limit Bandwidth Usage: Select On/Off to enable/disable bandwidth usage limitations.
When activated, the Mobile Gateway™ video server will not consume more than a user-
selected bandwidth, independent of the total number of connected viewers.
•
Maximum Streaming Bandwidth: Enter the maximum bandwidth to be used making
sure to select between kilobits (Kbps) and megabits (Mbps). A table below these fields
shows the available bandwidth for typical networks.
•
Click Apply to update the server settings. If entries in the Access section have been
changed, the web browser must be restarted in order to access the Mobile Gateway™
video server once again.
Draft version 1.7
Inetcam® and iMViewer™ are the property of Inetcam, Inc.
12