Asus SpaceLink WL-100 User Manual page 33

SSID
Use the SSID filed to configure the SSID for the ASUS SpaceLink PC Card.
You can enter a new SSID or select one from the drop-down list box. SSID
stands for "Service Set Identifier", which is a string used to identify a wire-
less LAN. You will only be able to connect Access Points which has the
same SSID as the one you set. Use different SSIDs to segment the wireless
LAN and increase security. SSIDs must all be printable characters and hav-
ing a maximum of 32 case sensitive characters, such as " Wireless LAN".
Set the SSID to "any" if you wish to allow your station to connect to
any IEEE 802.11 Infrastructure Network it can find. When you set to
"any", "Scanning..." will begin and may take a long time. Use "Sur-
vey" to view all Access Points within range and their SSIDs.
Channel
Using the Channel field to select the radio channel for ASUS SpaceLink PC
Card. In an "infrastructure" network, your PC Card will automatically select
the correct frequency channel required to communicate with an Access Point,
this parameter will be fixed in "Auto" and cannot be changed. In an "Ad
Hoc" network, you can decide the channel number for the ASUS SpaceLink
PC Card. Any ASUS SpaceLink PC Card can communicate in the same net-
work if each has the same frequency channel setting. The radio channels you
may use depend on the regulations in your country. For United States (FCC)
and Canada (IC), channels 1 to 11 are supported. For Europe (ETSI) except
Spain and France, channels 1 to 13 are supported. For Spain channel 10 and
11 are supported. For France, channels 10 to 13 are supported. For operation
in Japan (MKK), channels 1 to 14 are supported.
Data Rate
Fully Auto – Automatic transmit data rate falls back to 1, 2, 5.5, or 11
megabits per second when necessary to maintain transfers with devices.
Auto 1 or 2 Mbps – The PC Card will adjust to the most suitable trans-
mission rate. The transmit data rate is either 1 Mbps or 2 Mbps.
11 Mbps – Fix data rate to 11 megabits per second.
5.5 Mbps – Fix data rate to 5.5 megabits per second.
2 Mbps – Fix data rate to 2 megabits per second.
1 Mbps – Fix data rate to 1 megabits per second.
ASUS SpaceLink WL-100 WLAN PC Card
Chapter 3 - Reference
33