Acer Power SE User Manual page 65

Parameter Description
Parallel Port Lets you enable or disable
the parallel port.
Base Address Lets you set a logical base
address for the parallel
port. This parameter is
configurable only if the
Parallel Port parameter is
enabled.
IRQ Lets you assign an
interrupt for the parallel
port. This parameter is
configurable only if the
Parallel Port parameter is
enabled.
Operation Mode Lets you set your parallel
port's operation mode.
This parameter is
configurable only if the
Parallel Port parameter is
enabled.
ECP DMA Allows you to assign a
Channel DMA channel for the ECP
parallel port function. This
parameter is configurable
only if you select the
Extended Capabilities Port
(ECP) as the operation
mode.
Onboard Device Allows you to configure the
Settings device controllers available
on board. Selecting this
option displays the
Onboard Device Settings
sub-menu.
Options
Enabled or Disabled
3BCh, 378h, 278h
5 or 7
Standard Parallel Port
(SPP), Bidirectional,
Enhanced Parallel
Port (EPP), Extended
Capabilities Port
(ECP)
1 or 3
55