Acer Power SE User Manual page 56

46 Chapter 3
`BIOS Information
Description
Parameter
IDE Secondary Specifies the current
Channel Master configuration of the IDE
device connected to the
master port of the secondary
IDE channel.
IDE Secondary Specifies the current
Channel Slave configuration of the IDE
device connected to the slave
port of the secondary IDE
channel.
Total Memory Specifies the total amount of
onboard memory. The
memory size is automatically
detected by BIOS during the
POST. If you install additional
memory, the system
automatically adjusts this
parameter to display the new
memory size.
1st Bank Indicates the type of DRAM
installed in the DIMM 1
socket. The None setting
indicates that there is no
DRAM installed.
2nd Bank Indicates the type of DRAM
installed in the DIMM 2
socket. The None setting
indicates that there is no
DRAM installed.
Serial Port 1 Shows the serial port 1
address and IRQ settings.
Serial Port 2 Shows the serial port 2
address and IRQ settings.
Parallel Port Shows the parallel port
address and IRQ settings.
Format
Drive type,
capacity
Drive type,
capacity
Memory size in
MB
DIMM type,
capacity in MB
DIMM type,
capacity in MB
Address, IRQ
Address, IRQ
Address, IRQ