Specifications - Acer ALN-325 Series User Manual

This equipment generates, uses and radiate radio frequency energy. If not
installed and used in accordance with the instructions in this manual, may
cause interference to radio communications. This equipment has been tested
and found to comply with the limits for a Class B computing device pursuant
to Part 15 of the FCC rules, which are designed to provide reasonable
protection against radio interference when operated in a commercial
environment.
This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022 class B for ITE and EN 50082-1. This meets
the essential protection requirements of the European Council Directive
8 9 / 3 3 6 / E E C on the approximation of the laws of the Member States relating
to electromagnetic compatibility.

Specifications

System Configuration
Standards Conformance: IEEE 802.3 10BASE-T, and IEEE 802.3u
Half/Full-Duplex Operation: 10 Mbps and 100 Mbps
Hub-to-Workstation Distance: 100m max.
Cable Connections: RJ-45 (10BASE-T) Cat. 5 UTP
End-User Devices Supported: PCI local bus-compliant PCs
EMI Certification: FCC Part 15 Class B, VCCI Class 2, CE Mark, C-tick
Operating Environment
Temperature: 0˚C ~ 50˚C
Federal Communications Commission
Frequency Interference Statement
CE Declaration of Conformity:
100BASE-TX
RJ-45 (100BASE-TX.) Cat. 5 UTP
Humidity: 10% to 90% (Non-condensing)
7