Table of Contents
Advertisement
3.3.1
Configure/View Host Adapter Settings Menu
The Configure/View Host Adapter Settings menu lists three settings under SCSI
Bus Interface Definitions and three additional options, as shown in Figure 3-2:
•
Host Adapter SCSI ID: changes the host controller SCSI ID from its default
value of 7
•
SCSI Parity Checking: enables or disables host controller SCSI parity
checking
•
Host Adapter SCSI Termination: configures host controller SCSI termination
Advanced users can access Boot Device Options, SCSI Device Configuration, and
Advanced Configuration Options through the following menu:
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 3-2 Configure/View Host Adapter Settings Screen
Adaptec AIC7880 Ultra/Ultra W
AIC-7880 Ultra/Ultra W at Bus:Device 00:10h
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID ................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination .................Enabled
Additional Options
Boot Device Options .................................. Press <Enter>
SCSI Device Configuration ........................ Press <Enter>
Advanced Configuration Options................ Press <Enter>
<F6> - Reset to Host Adapter Defaults
SCSISelect (TM)
Chapter 3 - System Utilities 3-7
Utility
=default)
*
Advertisement
Table of Contents
