Table of Contents
Advertisement
3.1.2
Quick Way to Execute AFlash
When you have already copied the AFlash files into your hard disk, you can
simply type the following on the DOS prompt (subdirectory where the files are
located) to quickly execute the program.
aflash (filename)
The program automatically performs the loading and programming functions,
then reboots the system.
If the program cannot find the BIOS file, it returns to the main menu and flashes
the following message:
Can't Read This File !!! Press any key to continue...
In this case, follow the procedures for loading and programming the BIOS file
using the main menu.
Chapter 3 - System Utilities 3-3
Advertisement
Table of Contents
