Liquid Damage - Panasonic KX-TG1611AL Operating Instructions Manual

Useful Information
Problem
The handset does not ring.
I cannot make a call.
*1 KX-TG1612
Caller ID
Problem
Caller information is not displayed.
Caller information is slow to display.
Time on the unit has shifted.

Liquid damage

Problem
Liquid or other form of moisture has
entered the handset/base unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying process.
26
Cause/solution
L The ringer volume is turned off. Adjust ringer volume
(page 13).
L The handset is too far from the base unit. Move
closer and try again.
L Another unit is in use.
L The unit is not designed to be used with rotary/pulse
dialling services.
Cause/solution
L You must subscribe to a Caller ID service. Contact
your service provider/telephone company for details.
L If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the
wall socket.
L If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base unit
and the telephone line socket. Contact your DSL/
ADSL provider for details.
L Other telephone equipment may be interfering with
this unit. Disconnect the other equipment and try
again.
L Depending on your service provider/
telephone company, the unit may display the caller's
information at the 2nd ring or later.
L Move closer to the base unit.
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
"Manual" (off) (page 15).
Cause/solution
L Disconnect the AC adaptor and telephone line cord
from the base unit. Remove the batteries from the
handset and leave to dry for at least 3 days. After the
handset/base unit are completely dry, reconnect the
AC adaptor and telephone line cord. Insert the
batteries and charge fully before use. If the unit does
not work properly, contact an authorised service
centre.
*1
Wait and try again later.